As energy is becoming more expensive by the day and natural resources are limited, it is crucial to use them efficiently and economically. Our advice? Reclaim the energy that would otherwise go to waste.

Heat-X Rotor

Heat-X Rotor

Disc heat exchanger for effective water-to-water heat transfer in laundries.

  • Capable of handling extremely polluted wastewater
  • Large heat buffering capacity
  • Minimal maintenance required
Heat-X Energo

Heat-X Energo

Shell-and-tube heat exchanger for effective water-to-water heat transfer in laundries.

  • Excellent efficiency thanks to flow matching control
  • Small footprint
  • Plug & play solution
Heat-X Air E

Heat-X Air E

Air-to-water heat exchanger recovering the sensible and latent heat from ironers.

  • For all ironer types
  • No contamination of the fresh water thanks to indirect heat transfer
  • Self-cleaning design
Heat-X Air2Air & Lint-X Cyclone

Heat-X Air2Air & Lint-X Cyclone

Effective air-to-air heat reclaim solution for dryers

  • Exhaust air is filtered before heat recovery
  • Lowers energy consumption of the dryer up to 35%
  • Increases dryer productivity up to 7%
Steam-X

Steam-X

Low pressure steam recovery system.

  • Recovers high quality heat
  • Engineered for large peaks in condensate flow
Heat-X Collector

Heat-X Collector

Effective heat storage for the laundry.

  • Warm water is produced independently from process demand
  • Hot water is effectively stored in separate heat layers
  • No additional pumps needed to distribute warm water in the process
Heat-X Solar

Heat-X Solar

Hot water production system based on solar energy.

  • Easy integration in existing warm water system
  • Reclaims up to 70% of the sun radiation
  • Enhances the green image of your laundry
Heat-X Air C

Heat-X Air C

Air-to-water heat exchanger recovering the sensible and latent heat from ironers.

  • Only for gas ironers
  • Capable of heating fresh water to temperatures up to 90°C
  • Small ecological footprint
Zero-Steam Hot water

Zero-Steam Hot water

Steam-free integrated solution for washer extractors and/or tunnel washers.

  • Fresh water is heated up to 95°C and is directly introduced in the wash process
  • Modular design
  • Very low Nox emissions
Zero-Steam Main wash booster

Zero-Steam Main wash booster

Steam-free in-line application for single tunnel washer.

  • Process water is heated indirectly by a heat exchanger
  • Wash temperatures up to 75°C
  • Plug & Play solution

Related News & Press

To Dose Or Not To Dose

To Dose Or Not To Dose

Justin Kerslake, Operations Director at Christeyns UK, reports on the features and benefits of auto-dosing systems. Auto dosing is now…